PWRH with normal headroom trolley

PWRH

The normal headroom trolley is one of three trolley versions the manufacturer offers for the PWRH hoist, and the catalogue rates it from 1,000 kg to 50,000 kg, larger on request. Against the low headroom version it takes more clearance between the hook and the ceiling, and in exchange reaches a higher capacity, which is why it is the version specified when hall height is not the constraint. The catalogue publishes no model table for this version, so this page states the range and the standard scope of delivery only, and the model is settled with the customer against capacity, span and runway. On the commercial side the catalogue does state one figure explicitly: a warranty period of two years.

Series data

Capacity: 1000–50000 kg
Drive: Electric
Series code: PWRH
Manufacturer: PLANETA
Environment: Indoor

Request a quote 052-6324307

Series data: PWRH with normal headroom trolley
Item	Value
Operating voltage	AC 380–415 V / 3ph / 50 Hz
Control voltage	AC 48 V
Protection class	IP55
Insulation class	F
Duty cycle	60% ED
Trolley travel speed	2–20 m/min
Wire rope	2160 MPa
Ambient temperature	-10 °C – 40 °C

Standards

DIN 15401

Other series in this category

PWRH

PWRH Low Headroom electric wire rope hoist

1000–20000 kg
Electric
Indoor

PWRH in its low-headroom build is a monorail electric wire rope hoist from 1.000 kg to 20.000 kg, designed for minimum headroom — the smallest possible gap between hook and ceiling. Lift height is chosen at order from 6, 9, 12 or 18 metres. The hoist is rated for indoor operation across an ambient range of -10 °C to 40 °C at protection class IP55, and the hook is made to DIN 15401.

View series

PWRH

PWRH with double-girder trolley

2000–80000 kg
Electric
Indoor

The double-girder build of PWRH carries the series to its full range, 2.000 kg to 80.000 kg — the heavy end of the catalogue, where the load rides on a trolley spanning two girders rather than hanging from a single rail. Lift height is chosen at order from 6, 9, 12 or 18 metres. Like the low-headroom build it is rated for indoor operation at IP55 with a DIN 15401 hook, and the frame size grows with the load: the table carries size H and size C for every step.

View series

GH A12

GH A12 wire rope hoist

1000–3200 kg
Electric

The A12 is the smallest frame in GH's new hoist generation, rated 1 to 3.2 t. Lifting speed is 5 or 10 m/min depending on whether the rope is reeved 4/1 or 2/1, and the height of lift reaches 21.6 m. A frequency inverter on hoisting and cross travel is standard across all four sizes, rated 5 m/min at full load and 8 m/min at quarter load. A two-speed motor is optional, and A12 is the one size where that option runs at 5 and 1.25 m/min rather than 5 and 0.8.

View series

Back to Wire Rope Hoists

Need a quote for this series?

Tell us what you need: capacity, lift height and environment, and we will come back with a specification and a price.

Request a quote