PITCH-S twin hook chain hoist

PITCH-S

PITCH-S lifts one load on two hooks in synchronous motion, rated up to 25 t. The catalogue gives it for handling long and bulky loads that are not stable on a single lifting point, and the distance between the two hooks is adjustable to the working area over a range of 0.5 to 3 m rather than fixed at manufacture. It is offered on a push or an electric trolley. The catalogue publishes no model table for this execution, so this page states the range only.

Series data

Capacity: ≤ 25 t
Drive: Electric
Series code: PITCH-S
Manufacturer: PLANETA

Request a quote 052-6324307

Series data: PITCH-S twin hook chain hoist
Item	Value
Distance between hooks	0.5–3 m

Other series in this category

PITCH PF

PITCH PF electric chain hoist

125–12500 kg
Electric
Cleanroom
Food industry
Outdoor

PITCH PF is PLANETA's electric chain hoist line, spanning 125 kg to 12.500 kg. The table below carries all 52 models in the series exactly as the manufacturer's catalogue lists them: by capacity, FEM classification, lifting speed and chain size. Every row is quoted with a 3 m lift; lift heights up to 20 metres are available to order. Models from 15 t upwards are listed under the separate PITCH PF+ series. The lower hook is made to DIN 15400 and the chain to DIN EN 818-7.

View series

PITCH PF+

PITCH PF+ heavy duty electric chain hoist

15000–37000 kg
Electric
Cleanroom
Food industry
Outdoor

PITCH PF+ is the upper capacity tier of the PITCH line, spanning 15.000 kg to 37.000 kg. The table below carries all 13 models in the series exactly as the manufacturer's catalogue lists them: by capacity, FEM classification, lifting speed and number of chain falls. The higher capacities are reached by increasing the chain falls from 6 to 12, so lifting speed drops as capacity rises, from 3.2 m/min at 16 t to 0.56 m/min at 37 t. Every model runs an 11.3 x 31 mm chain and weighs between 306 and 489 kg. The lower hook is made to DIN 15400 and the chain to DIN EN 818-7.

View series

PEH-R

PEH-R corrosion-resistant chain hoist

250–1250 kg
Electric
Food industry
Chemical industry
Outdoor

PEH-R is a corrosion-resistant electric chain hoist for loads up to 1.250 kg, built for the food, pharmaceutical and chemical industries, waste-water treatment plants and outdoor use. Every part in contact with the chain — chain wheel, load hook and screws — is in a corrosion-resistant design, the housing is cataphoresis-coated, and the protection class is IP65. The table lists all 12 models at both duty grades the manufacturer publishes, M4 (A4) and M5 (A5).

View series

Back to Chain Hoists

Need a quote for this series?

Tell us what you need: capacity, lift height and environment, and we will come back with a specification and a price.

Request a quote