Jib Cranes

Jib cranes for workstations and machine tending, from the BRIMA catalogue. Six series: four with manual slew from 80 to 1,000 kg on arms of 3 to 7 m, and two with powered slew from 1,000 to 6,300 kg on arms of 5 to 10 m. Each mounts on its own column or on a wall, and slew runs from 180 to 360 degrees depending on the model. The 95 configurations the catalogue offers are set out in each series table, which gives, for every rating, the arm lengths it is sold in.

When to choose this

Its own column where there is no load-bearing wall by the workstation
Wall-mounted where the floor has to stay clear
Powered slew from 1,000 kg upward, manual slew below that
Arm length falls as the rating rises, and each series table shows which combinations are sold

Request a quote 052-6324307

Series and models

Each series states its figures exactly as the manufacturer's catalogue states them, and cites the catalogue and the page they came from.

Filter series

Capacity

BZK

Fixed Column Jib Crane BZK

125 – 500 kg
Electric

A jib crane on its own floor column, for a workstation with no load-bearing wall beside it. The catalogue offers three ratings, 125, 250 and 500 kg, on arms of 4, 6 and 7 m, with manual slew through 270 degrees. Lifting itself is by electric chain hoist. The column is anchored to the floor with chemical bolts, and a buffer on the track limits the trolley travel. The table sets out the six configurations sold: a 7 m arm is available at 125 kg only.

View series

BZL

Fixed Column Jib Crane BZL

125 – 500 kg
Electric

A jib crane on its own floor column, in an execution the catalogue presents as increasing the hook height under the arm. Its load table is identical to BZK: 125, 250 and 500 kg on arms of 4, 6 and 7 m, manual slew through 270 degrees, six configurations in all. The two series also carry the same feature list. The catalogue separates them on the strapline alone and on no numeric figure, so the choice is a question of the hook height required rather than of capacity.

View series

BXK

Wall Mounted Jib Crane BXK

80 – 1000 kg
Electric

A wall-mounted jib crane, which leaves the floor entirely clear. It is the widest of the four manual series: five ratings from 80 to 1,000 kg on arms of 3, 5, 6 and 7 m, with manual slew through 270 degrees. The arm is a rigid or flexible track, the trolley is pushed by hand, and the catalogue notes that its low weight allows installation in a light-framed industrial building. The table sets out the 17 configurations sold: 1,000 kg stops at 5 m.

View series

BXL

Wall Mounted Jib Crane BXL

125 – 500 kg
Electric

A wall-mounted jib crane on a standard wall bracket, which the catalogue presents as the simple assembly. Three ratings, 125, 250 and 500 kg, on arms of 4, 6 and 7 m, with manual slew through 270 degrees, six configurations. Its load table is identical to the BZK and BZL columns, so what separates it from the wall-mounted BXK is range rather than mounting: BXK reaches 1,000 kg and this series stops at 500.

View series

Electric Column Jib Crane

1000 – 6300 kg
Electric

A column jib crane with powered slew, in a load class above the four manual series. Eight ratings from 1,000 to 6,300 kg on arms of 5, 7, 8, 9 and 10 m, slewing under motor through a full circle of 360 degrees. The column is set into a concrete foundation and a buffer limits the trolley travel. The catalogue lists a mobile control and a powered trolley as options. The table sets out the 30 configurations sold: a 10 m arm runs to 2,500 kg, and 6,300 kg stops at 5 m.

View series

Electric Wall Mounted Jib Crane

1000 – 6300 kg
Electric

A wall-mounted jib crane with powered slew, in the same load class as the column model and through half a circle: 180 degrees rather than 360. Eight ratings from 1,000 to 6,300 kg on arms of 5, 7, 8, 9 and 10 m, with a load table identical to the column model, 30 configurations. The catalogue lists a mobile control and a powered trolley as options. A note on the source: the catalogue heads this model a fixed column crane, but the drawing, the wall bracket and the 180 degree slew all point to a wall mount, so that heading is not reproduced here.

View series

Other categories

EOT Cranes

Bridge cranes for every branch of industry and warehousing: metals and steel, foundries and hot metal handling, concrete and precast elements, energy plants and power stations, wind energy and turbine assembly, chemical and petrochemical processing, water and wastewater treatment, ports and shipyards, plastics and rubber, paper and board, food and beverage, automotive and workshops, logistics centres and storage warehouses, machine rooms and pump houses. The crane moves along three axes, down the length of the building, across the bridge and vertically, and covers the entire floor area without forklifts and without temporary rigging. The first decision is the mounting method. A top running crane travels on rails carried by columns and uses almost the full height of the building, which suits heavy loads and wide spans. An underslung crane hangs from the roof structure, and suits cases where columns cannot be added or where the production floor has to stay clear, at the cost of a shorter span. The second decision is the number of girders. A single girder is lighter, less expensive and puts less load into the structure. A double girder carries far heavier loads and also gives more hook height in the same building, because the hook rises between the girders rather than below them. The third decision is the operating environment. A bridge crane is built around its hoist unit and electrical system, so it can be specified for the environment it will work in. Alongside the standard industrial build we supply versions for ATEX classified areas, for marine and coastal installations, for dusty and high humidity conditions and for aggressive chemical environments. The specification is fixed at the design stage rather than retrofitted, so the environment should be defined in your first enquiry. We supply 129 configurations across three series: single girder from 2 to 12.5 tonnes over spans of 10.5 to 31.5 metres, double girder from 5 to 50 tonnes over spans of 13.5 to 31.5 metres, and underslung from 2 to 10 tonnes over spans of 6 to 20 metres. Standard lifting height is 9 metres and the duty rating is A5 to FEM 2M. Every crane is engineered to your building dimensions, your loads and your operating environment rather than selected from a catalogue. We carry out the site survey, the design, the installation and the commissioning, and stay with the crane through routine maintenance for its working life.

See details

Light Crane Systems

Light, mobile cranes for industrial applications

See details

Chain Hoists

Electric chain hoists for cranes and workstations

See details

Back to all categories

Need a quote for this?

Tell us what you need and we will come back with a specification and a price.

Request a quote